Office air is shared air. In a room full of people, CO&sub2; climbs and any airborne bug spreads on the same breath. A quiet, high-airflow purifier is the simplest fix — if it’s quiet enough to leave on during calls.
622 m³/h CADR, MERV-13, under 35 dB, ~15 W (about £21/yr) — standard filters, no proprietary lock-in, ships from the UK.
Check price →Use code KITS10 for 10% off at checkout.Sizing an office or meeting room
Aim for 4–5 air changes per hour. A 6–8 person meeting room (~40 m²) needs 400–600 m³/h of clean-air delivery; open-plan floors need one unit per zone. Undersizing is the usual mistake — a desktop gadget won’t turn over a real room.
Noise is the dealbreaker
An office purifier has to be inaudible on a video call. Most HEPA units are loud at the speed you actually need, so staff turn them down — and lose the cleaning. A kit delivering high airflow under 35 dB stays on all day without anyone noticing. This is exactly the trade-off covered in our guide to how air purifiers actually work — airflow and noise are linked by fan design, not just marketing.
Particles, not odours — know the difference
A MERV-13 filter is very good at capturing solid and liquid particles: dust, pollen, PM2.5, printer toner dust, and aerosolised droplets from cleaning sprays. It does not remove gases or odours — a curry from the kitchenette, a colleague’s perfume or off-gassing from new carpet tiles will pass straight through a particle-only filter. If odour is a recurring complaint in your office, look for a unit that pairs its particle stage with a genuine activated-carbon layer; don’t expect a particle filter alone to fix a smelly breakout area.
Placement in open-plan offices
Desks, partitions and filing cabinets all block airflow, so a single unit in the corner of a large open-plan floor will only really clean the air nearest to it. Treat the office as a set of zones — roughly one unit per 40–50 m² of open floor, or per meeting room — rather than one large unit for the whole building. Place units where air can circulate freely: away from being wedged under a desk or behind a printer, and ideally where the room’s natural airflow (from doors, vents or windows) will carry cleaned air further into the space. For big, awkward floorplates, our large room sizing guide goes into more detail on zoning and unit count.
Running cost for always-on
Offices run 8–10 hours a day, often longer with cleaning shifts and early starts. At ~15 W that’s pennies a week per unit; standard filters keep the ongoing cost trivial, so facilities teams can deploy several across a floor without a budget fight. We break the electricity and filter maths down in full in our running costs guide, including how MERV-13 kits compare with high-wattage HEPA towers over a year.
A simple buying checklist for offices
Before you order units for a workplace, check each candidate against these points:
- Clean-air delivery for the room — enough CADR for 4–5 air changes an hour at the room’s actual floor area, not just a headline square-footage claim.
- Noise at working speed — under 35 dB is the practical bar for a room with calls; ask for the dB rating at the speed you’ll actually run it, not the lowest setting.
- Standard, affordable filters — proprietary cartridges add up fast across a fleet of office units; standard MERV-13 media keeps facilities budgets predictable.
- Running cost per unit — low wattage matters more once you multiply it by a dozen units running all day.
- Simple maintenance — facilities staff need to swap filters in seconds, without tools or a manual.
For a general primer on pollutant sources and healthy air-change targets beyond the office, see our indoor air quality guide. Get sizing, noise and running cost right and an office purifier becomes something staff simply stop noticing — which is exactly the point.