The honest answer: one purifier cannot clean a whole house. Air doesn’t flow freely between closed rooms, so filtration is a per-room job. Here’s how to cover a home without overspending.
622 m³/h CADR, MERV-13, under 35 dB, ~15 W (about £21/yr) — standard filters, no proprietary lock-in, ships from the UK.
Check price →Use code KITS10 for 10% off at checkout.Why one unit can’t do it
A purifier only cleans the room it’s in. Air doesn’t mix freely through a closed internal door, so put a single unit in the hallway and the bedrooms either side stay largely untouched — the purifier is simply recirculating hallway air while the rooms that matter most, where doors are shut all night, see almost none of the benefit. This trips up a lot of first-time buyers who assume one big, powerful machine somewhere central will handle an entire house the way a boiler heats it. Filtration doesn’t work like heating: there’s no ductwork carrying clean air room to room, so plan by room, starting with where you spend the most hours.
Prioritise by hours spent
- Bedrooms — you spend a third of your life there, mostly with the door shut, so this is the highest-value unit in the house. A quiet, low-airflow setting overnight matters as much as raw output; see our quietest air purifiers guide if sleep noise is a concern.
- Main living room — where the family gathers in the evening, and usually the largest single space, so it benefits from the highest-CADR unit you own.
- Home office / nursery — add as needed; a home office matters for concentration and CO2, a nursery for peace of mind around dust and pollen — see our nursery guide for that specific case.
Two to three units cover most UK homes. Kitchens and bathrooms rarely need one, since extraction and ventilation do most of the work there and moisture is the bigger issue, not particles.
Sizing each room correctly
Coverage isn’t just about unit count — each unit needs enough clean-air delivery (CADR) for its room. A rule of thumb is 4–5 air changes per hour: divide the room’s volume in cubic metres by the target ACH to get the minimum m³/h CADR you need, then round up. A typical UK double bedroom (roughly 30 m³) needs relatively little; a larger open-plan living-diner can need considerably more, and may be better served by a higher-output unit or a second purifier rather than one machine working flat out. For anything above around 400 sq ft open-plan, our large room guide walks through the sizing maths in more detail.
The multi-unit maths still works
This is where low running cost pays off. Three kits at ~15 W each cost under £10/yr combined to run — less than a single big HEPA tower — and each room actually gets clean air, rather than one room getting excellent air and the rest getting none. Standard MERV-13 filters also keep the ongoing cost predictable across several units: roughly £40/year each for filters, with no proprietary cartridges to hunt down for three different rooms.
A realistic whole-house plan
In practice, most households don’t buy every unit on day one. A sensible rollout is to start with the bedroom you sleep in, live with it for a few weeks, then add the living room once you’ve felt the difference. If anyone in the house has hay fever, asthma or other sensitivities, moving that person’s room to the front of the queue makes sense — see our air purifier and asthma guide for what actually helps versus what’s marketing. By the time you’ve covered two or three rooms, most UK homes have addressed the overwhelming majority of the particle exposure that occurs indoors, at a running cost that’s still lower than one oversized single unit.